Dali Zensor 3 Bookshelf Speakers - Walnut
DALI ZENSOR 3 is a part of the award winning ZENSOR series. The ZENSOR 3 is developed and built to sound much larger than it actually is. Using a 7” woofer based on the technology from the ZENSOR 7 and the tweeter module from the ZENSOR 1, the ZENSOR 3 is able to recreate the high frequencies, the mid range and the low bass in the best possible way.
SOFT DOME TWEETER
With a clear heritage from our high-end series, the lightweight dome tweeter offers best in class resolution.
WOOD FIBRE CONES
This mix paper pulp and wood fibre makes the cones stiff and light which ensures that every micro detail in the signal is reproduced unfiltered.
DALI DRIVER DESIGN
Every driver used in the ZENSOR series is designed by DALI engineers. Only this way can we ensure that the DALI sound principles are preserved.
LOW LOSS CONSTRUCTION
By choosing every driver component with great care, we make sure that no signal is lost or changed on its way through the loudspeaker. Through very low mechanical loss, the most fragile sound details, even at very low listening levels, are preserved.
DALI ZENSOR 3 is a part of the award winning ZENSOR series. The ZENSOR 3 loudspeaker is developed and built to sound much larger than it actually is. Using a 7” woofer based on the technology from the ZENSOR 7 and the tweeter module from the ZENSOR 1, the ZENSOR 3 is able to recreate the high frequencies, the mid range and the low bass in the best possible way.
We have designed the cabinet so that it is large enough to deliver a sufficient, controlled and deep bass and yet is small enough to be placed on a shelf or floor stand.
The soft dome tweeter module has over and over again proved its ability to deliver a rich and detailed sound, and the module used in the ZENSOR 3 is no exception - delivering an extended frequency response with wide dispersion and low coloration.
Frequency Range (+/-3 dB) [Hz] 50 - 26,500
Sensitivity (2,83 V/1 m) [dB] 88.0
Nominal Impedance [ohms] 6
Maximum SPL [dB] 108
Recommended Amplifier Power [W] 25 - 125
Crossover Frequency [Hz] 2,600 Hz
High frequency driver, Quantity 1 x 25 mm
High frequency driver, Diaphragm type Soft Textile Dome
Low frequency driver, Quantity 1 x 7"
Low frequency driver, Diaphragm type Wood Fibre Cone
Enclosure type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 46.0
Connection Input Single Wire
Magnetic Shielding No
Recommended Placement Shelf or stand
Recommended Distance From Wall [cm] 5 - 30 cm
Dimensions With Base (HxWxD) [mm] 351 x 205 x 293
Weight [kg] 6.3
Accessories Included Manual
Finishes: Black Ash, Light Walnut
Additional charge for White finish