ProAc K3 Floorstanding Speakers - Nature Oak

ProAc K3 Floorstanding Speakers - Nature Oak (Allow 2-3 weeks for a delivery)

The K series range of speakers are called so because of the use of Kevlar in the construction of the drive units. So far we have only used Kevlar
and Carbon Fibre for bass and lower midrange reproduction in large enclosures. These cones have a light, stiff quality, the Kevlar has more warmth
making excellent bass transients and extension.

Cone material is something that ProAc have been developing over the last fifteen years with an emphasis on Carbon fibre and Kevlar. A new Kevlar cone was developed
which would work into the midrange far better than previous Carbon fibre or Kevlar cones, this also has the added benefit
of a phase plug giving better detail and dispersion.

The new Kevlar drive unit was developed for the K3 and has excellent weight to the bass as well as good extension with
a detailed and uncoloured midrange. This new Kevlar unit would go into a new speaker called the K3, two of these units
are used with our ribbon tweeter placed centrally in our K constructed cabinet. A high quality crossover was specially
designed for the K3 to seamlessly mate with the ribbon tweeter and this new crossover uses high quality components
split for bi-amping and bi-wiring and connected directly to the terminals.

As far as sound quality goes, the K3 has a wonderfully electrostatic type of midrange, very clear and detailed with a
dynamic bass response.

We are sure the K3 will give customers who desire music from full orchestral to loud rock the desired results with ease.

Specifications:
NOMINAL IMPEDANCE 4Ω
RECOMMENDED AMPLIFIERS 10 - 250W
FREQUENCY RESPONSE 25Hz - 30kHz
SENSITIVITY 89dB linear for
1 Watt at 1 Metre
BASS/MIDRANGE DRIVERS 2x 6.5 special bass/
midrange drive unit with
Kevlar cone and phase
plug
TWEETER ProAc ribbon with
diaphragm as light as a
human hair, alnico
magnet and rear
chamber damping
CROSSOVER Finest components on
dedicated dual layer
circuit board. ProAc
multistrand oxygen free
copper cable
throughout. Split for
optional Bi Wiring or Bi
Amplification
HEIGHT 42.5” (1073mm)
WIDTH 8.5” (215mm)
DEPTH 13.5” (340mm)
WEIGHT 93.5lb (42kg) each
MODE Floor Standing
GRILLE Acoustically transparent
crimplene