Luxman L-507Z Integrated Amplifier
The L-507z joins Luxman’s integrated amplifier range with numerous advances and features our newly designed “LIFES1.0” distortion cancelling feedback engine. “LIFES” is a significant evolution from “ODNF” circuitry, which has long been a key advantage of Luxman amplifiers since its 2010 introduction in our X-series. The robust L-507z marks the beginning of Z-Series, all being developed to include this latest “LIFES” high-quality amplification system, a core technology also shared with our new flagship M-10x stereo/mono power amplifier.
In addition, new user features enhance both convenience and performance required by today’s music listeners. Updated front panel VU meters combine with a 7-segment LED display to improve visibility of volume levels from any listening position. Alongside the standard 6.3 mm headphone jack is a new 4mm “Pentaconn” balanced output jack for better L-R separation. Rear- panel 12 volt trigger connections are now incorporated enabling more convenient integration among automated systems or a home-theater.
SPECIFICATIONS
Rated output: 110W+110W（8Ω）
220W+220W（4Ω）
Input sensitivity/
input impedance: PHONO（MM）: 2.5mV / 47kΩ
PHONO（MC ）： 0.3mV / 100Ω
LINE: 180mV / 47kΩ
BAL.LINE: 180mV / 79kΩ
MAIN IN: 1.05V / 47kΩ
Output voltage: PRE OUT: 1V
Frequency response: PHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion: 0.007% or less (8Ω, 1kHz)
0.03% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A): PHONO (MM): 91dB or more
PHONO (MC): 75dB or more
LINE: 105dB or more
Volume adjustment: New LECUA1000
Amplification feedback circuit: LIFES 1.0
Output configuration: Bipolar 3-parallel push-pull
Damping factor: 300
Max. amount of tone control: BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply: 230V~(50Hz) / 115V~(60Hz)
Power consumption: 350W
886W (under no signal), 0.4W (at standby)
External dimensions: 440(W) x 178(H) x 454(D) mm
front side knob of 20mm and rear side terminal
of 27mm included in depth
Net weight: 25.4kg (main unit)
Accessories: Remote control (RA-17A)
Power cable
Speaker terminal
Supported Y-lug terminal
dimension:
Width of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
