EAT Forte-S Turntable with 12CC Evo & Jo No.5 - Makassar
Terrific inverted bearing construction with ceramic ball on the top faces to the Teflon. The pressure on the ceramic ball is reduced by two enormous neodymium magnets that are holding the platter and take over most of the load from the heavy platter. The big brother Forte has built in two motors in separate chassis that makes its imposing 70 cm width. EAT Forte S is "only" 55cm width and single-piece construction. It has also two AC motors but they are built symmetric on the right side besides of the platter, therefore you do not need two belts with different length as by big EAT Forte. Operating of the motor by display panel was getting simpler into the 3 main keys: 33.3, 45 and on/off button.
Both turntables are mass-loaded with huge magnetic feet, which act as a sub chassis. Forte S uses four magnetic feet with possible change of the height. This brings impressive low and excellently dumped resonance frequency of entire system. Standard distortions have no meaning at all for S and his brother as well.
Specifications:
Electronic speed change * 33.33/* 45.11
Speed variance */- 0.09%
Wow and flutter ± 0.009%
Signal-to-noise ratio -73dB
Power consumption 4W
Outboard power supply 16V/1.000mA AC, suitable for your country's mains supply
Dimensions (WxHxD) 550x250x440mm
Weight 44kg
