Monitor Audio Climate Climate CLG-W12 Subwoofer - Brown (each)
The CLG-W12 is a passive subwoofer. Optimised for discreet sub-surface installation, its proprietary Monitor Audio bandpass design incorporates an internally loaded 12" C-CAM driver which sits in a waterproof rotationally-moulded polymer enclosure buried below the garden surface - only the CLG-W12’s domed output port is visible.
From this little ‘chimney’ powerfully taut bass frequencies will join the clean mids and highs of the surrounding CLG140/CLG160 satellites for punchy and articulate full-range garden sound.
The CLG-W12 can be powered from a single amplifier channel at 4 ohms, with its 70/100 V line option recommended for cable runs over 10m (30ft) and for adding subwoofers to the system. In this line configuration, the CLG140/CLG160 satellites are daisy-chained to the CLG-W12, one after the other, up to a recommended maximum of twelve per subwoofer. System expansion to larger garden spaces simply involves the addition of amplifier channels, subwoofers and satellites.
In the simplest designs, satellites are connected in a mono configuration to one amplifier channel, the other channel powering the subwoofer. The use of a stereo power amplifier with 70/100volt line capability and crossover features will allow the adjustment of levels between bass and mid-high range. Alternatively, the system can be designed to provide stereo operation by adding elements to create left/right zones.
Key Features
Below ground garden installation. On patios or decks will install within a suitably sized planter
Extended response down to 30 Hz
Long throw 12" sub-woofer driver featuring C-CAM cone technology and rigid die-cast chassis
Bandpass cabinet enclosure delivers high efficiency and punchy, extended bass
70/100 V and 4 ohm tap for flexible system design: additional units can be added and ‘daisy-chained’ together
Robust moulded cabinet: strong and waterproof with fewer joints to compromise structural integrity
Specifications:
Nominal Impedance 4 ohms
Sensitivity (2.83v @ 1m) 87 dB
Maximum SPL 110 dBA
Frequency Response, In-Room (-6dB) 30 Hz — 100 Hz
Power Handling (RMS) 250 W
Recommended Amplifier Requirements 100 — 250 W
External Dimensions (Including Grille and Terminals (H x W x D)) 750 x 380 x 505.5 mm
Weight (each) 19.5 kg (42 lb 14 oz)
