The JBL SA550 Classic is inspired by the classic JBL SA600 amplifier from the 1960’s, with retro styling and walnut veneer side panels to match JBL Classic and Studio Monitor loudspeakers on the outside.
JBL SA550 Classic Integrated Amplifier with Bluetooth
The JBL SA550 Classic is inspired by the classic JBL SA600 amplifier from the 1960’s, with retro styling and walnut veneer side panels to match JBL Classic and Studio Monitor loudspeakers on the outside.
On the inside, the JBL SA550 is a music system for today using an advanced amplifier topology with high power output, inventive efficiency, and fine noise control for captivating musicality and effortless power.
Straight out of the box, pair your smart phone or tablet to the SA550 Classic with Bluetooth for instant high-quality music from all your music services and libraries that you listen to everyday.
The JBL SA550 Classic includes the latest Bluetooth AptX®Adaptive technology for hi-res audio over Bluetooth and low latency to ensure audio is in sync with video. All digital audio is rendered using a reference high resolution DAC with time domain jitter elimination for perfect sound, every time.
Specifications:
Continuous power output (0.5% THD), per channel
Both channels, 8Ω, 20Hz—20kHz 90W
Both channels, 4Ω, at 1kHz 150W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.002%
Phono Input Moving Magnet (MM)
Input sensitivity at 1kHz 5mV
Input impedance 47kΩ + 100pF
Frequency response (ref. RIAA curve) 20Hz – 20kHz ± 1dB
Signal/Noise ratio (A-wtd) 50W, ref. 5mV input 80dB
Overload margin, ref. 5mV at 1kHz 21dB
Nominal sensitivity 1V
Input impedance 10kΩ
Maximum input 6Vrms
Frequency response 20Hz – 20kHz ± 0.2dB
Signal/Noise ratio (A-wtd) 50W, ref. 1V input 106dB
DAC ESS9038K2M
Frequency response 20Hz - 20kHz ± 0.05dB
Supported sample rates Optical 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz
Coaxial 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Bit depth 16-bit – 24-bit
Total harmonics distortion + Noise 0.0007%
Signal/Noise ratio (A-wtd) 115dB
Nominal output level 630mV
Output impedance 230Ω
Load range 16Ω – 2kΩ
Output impedance 1Ω
Maximum output level into 600Ω 5Vrms
Mains voltage 100V or 110–120V or 220–240V, 50–60Hz
Maximum power consumption 500W
Dimensions in mm (including feet, control knob and
connectors) 448 W x 124 H x 321 D
Weight (net) 11.2kg
Weight (gross) 14.0kg
The JBL SA550 Classic is inspired by the classic JBL SA600 amplifier from the 1960’s, with retro styling and walnut veneer side panels to match JBL Classic and Studio Monitor loudspeakers on the outside.
